Posts Tagged ‘Mac’


Compiling OpenFOAM 1.7.x for OS X 10.6

September 16, 2010

This is a short guide for installing the Developer version of OpenFOAM for Snow Leopard. I have tried to include all details.

What you need:

A mac with OS 10.6 and  approximately 10 GB of HD space.

Preliminary steps:

Install the OS X developer tools

Install GCC 4.3 , 4.4 or 4.5 from either Macports or Fink. (4.5 will only work with 1.7.x) and git. I will presume 4.5

Once this you may start building OpenFOAM. The Mac PS file system is not file sensitive by default. Therefore you need to make a case-sensitive disk image for OpenFOAM.

Open Disk Utility (/Applications/Utilities/Disk Utility)

Menu > File > New > Blank disk image ..

You may save the image wherever you want, however, name the image ‘OpenFOAM’.

Using the drop box change the format to ‘Mac OS Extended (Case sensitive)’

Change the size to at least 5 GB. you may increase this later if required.

Create the image and close Disk Utility.

To keep the installation nice and clean we are going to mount the image at $HOME/OpenFOAM

This is the default OpenFOAM install site which will make your life easier in the long run.

To do this add the following to your .bashrc file (if you don’t have one you will need to create one):

hdiutil attach "/path/to/your/disk_image.dmg" -mountpoint "$HOME/OpenFOAM" > /dev/null

This will mount the image when your first open the terminal from now on.
Also add the following which sources the OpenFOAM bash files. This will create errors until you download OpenFOAM.

. $HOME/OpenFOAM/OpenFOAM-1.7.x/etc/bashrc

After you have saved your .bashrc file open a new window in the terminal. You will get the following error:

-bash: /Users/yourusername/OpenFOAM/OpenFOAM-1.7.x/etc/bashrc: No such file or directory

Download the following files and move them to $Home/OpenFOAM;
The 1.7.1 Third party software pack .
The openFOAM 1.7.x patch by Bernhard Gschaider.

The third party patch Bernhard Gschaider.

Check the thread for any updates.

Move these files to $HOME/OpenFOAM. Now we need to edit OpenFOAM-1.7.x-Mac_v2.patch. Open up the file in a text editor and check that the versions of gcc / g++ match what you have installed.
If you installed from macports you will have gcc-mp-4.5 and g++-mp-4.5 Whereas from fink it is gcc-fsf-4.5 and g++-fsf-4.5. Search through the file for ‘-mp-‘ and make sure the version and distribution strings match what you have installed.

At the terminal execute the following:

git clone git://
tar -xfz ThirdParty-1.7.1.gtgz
mv ThirdParty-1.7.1 ThirdParty-1.7.x
cd ./ThirdParty-1.7.x
patch -p1 <../ThirdParty-1.7-Mac.patch
cd ../OpenFOAM.1.7.x
patch -p1 <../OpenFOAM-1.7.x-Mac_v2.patch
. $HOME/OpenFOAM/OpenFOAM-1.7.x/etc/bashrc

This should give you a working OpenFOAM distributions with a few exceptions:
foamToTec360 does not work
parafoam does not work. To address this do the following:
Download and install the Paraview application.
In your case directories ‘touch’ the foam file.
i.e. in a case called ‘isofoam_case’

touch isofoam_case.foam

Open this file with the binary install of Paraview.